Files
PaperClipAI/doc/runner-image-contract.md
T
Nicky LeachandClaude Fable 5.2 9b613562b7 feat(docker): split the Runner image into stable layers and add a slim variant (#21229)
## Thinking Path

> - Paperclip is the open source app people use to manage AI agents for
work
> - The Runner is the part that executes agent work: a daemon
(`paperclip-runnerd`) and a provider pack of agent tools
> - Part 2 of this stack builds the Runner alone as the image
`runner-artifacts`, in one layer of about 850 MB
> - Most of those bytes are provider binaries and Node. They change only
with a provider version or the Node pin, but one layer means that every
Runner source change makes all 850 MB new
> - About half of the image is the pack's transport archives. A consumer
that copies the pack as files does not need them
> - This pull request splits the image into layers by how often their
content changes, and adds a slim variant without the transport archives
> - The benefit is that a new image shares about 93% of its bytes with
the one before it, and a consumer that needs no transport archives pulls
half as much

## Linked Issues or Issue Description

Refs #21204 (part 2 of this stack) and #21167 (provider pack layers). No
issue exists for this change.

**Problem or motivation**

The image from part 2 is one layer. A registry and a builder store and
move layers, not files. A change to one Runner source file therefore
makes a new 850 MB layer, although 790 MB of its content is the same as
before. The image also holds the provider pack two times: as files, and
as transport archives of those files. Some consumers need only the
files.

**Proposed solution**

Write the image as four layers: the pack's large dependency files,
everything else, the transport archives of those large files, and the
other transport content. Make the two large layers byte-identical from
build to build. Add the target `runner-artifacts-slim`, which is the
first two layers. The full image is the slim image plus the two
transport layers, as the same layer blobs. Check all of this on the
built images.

**Alternatives considered**

- Two unrelated images. Then the registry stores the shared content two
times unless the layers happen to match, and nothing ties the two
together.
- Split by path only, with all files of 1 MiB or more in the first
layer. Six of those files are the Runner's own bundles under `dist`.
They change with the Runner's source, so the first layer would change
with it too.
- Leave the transport archives as they were written. Their bytes then
depended on timing (see "What Changed"), and the archive layer never
repeated.

**Roadmap alignment**

This is build infrastructure. It adds no product feature and does not
overlap an item in `ROADMAP.md`.

This is part 3 of 4. Each part is on top of the one before it:

1. #21228 (merged): an optional field in the provider pack manifest
2. #21204: build and check the Runner image, with no publication
3. #21229: layers by change rate, and the slim variant (this pull
request)
4. #21230: publish both variants from `master`

## What Changed

- `Dockerfile`: two final stages. `runner-artifacts-slim` is two `COPY
--link` layers. `runner-artifacts` starts from it and adds two more. The
build stage sorts its output into the four layers. Every path is where
it was in part 2: consumers copy by path and see no difference.

  | Layer | Content | Changes with |
  | --- | --- | --- |
| 1 | The pack's dependency files of 1 MiB or more: provider binaries
and Node | A provider version or the Node pin |
| 2 | Everything else, with `runner-image.json` | Every Runner source
change |
| 3 (full only) | The transport archive of each file in layer 1 | The
same as layer 1 |
| 4 (full only) | The other transport archives, the overlay archive and
the receipt | The same as layer 2 |

- Stable bytes. The files of layers 1 and 3 get timestamp 0, and the
large dependency files get it before their transport archives are
written. A file under the pack's `dist` is the Runner's own output, so
it and its archive are in layers 2 and 4.
- `scripts/create-provider-pack-archive.mjs`, two separate commits.
**This script also writes the application image's archives.**
- The same file now gives the same archive every time. The script piped
tar into Node's zstd compressor. When the pipe ended while the
compressor still had its last chunk queued, Node finished the zstd
stream two times, and the archive got an empty frame of nine bytes at
its end. That depended on timing. In the pinned Linux base, 37 of 60
runs of the old code had the frame. The compressor is now ended only
after it has taken every chunk.
- Archive N holds file N of the receipt, and the receipt listed the
files in path order. `dist` sorts before `node_modules`, so one more
large file in the Runner's own output gave every dependency file another
archive name, and layer 3 became a new blob with the same contents. The
receipt now lists the files outside `dist` first. The readers
(`provider-pack-layers.ts`, `retained-provider-pack-source.ts`) pair
file N with `N.tar.zst` and do not use the path order, so they need no
change. For the application image, the archive numbers change one time,
and the bytes of each archive do not change.
- `runner-image.json` is the same file in both variants. Its new field
`fullImageOnly` names the two paths that only the full image has.
`paths` did not change.
- `scripts/runner-image-layout.mjs check` takes `--variant slim|full`.
It is required and has no default. A slim tree that holds a transport
path fails. A full tree without them fails.
- `scripts/runner-image-oci.mjs` (new, 585 lines). It is not an input of
the image, because the image build does not run it.
- `unpack <oci archive> --out <tree>` writes the tree of an image from
the layers of its archive, in order. It checks every blob against its
digest. It refuses a whiteout, an absolute path, a path with `..`, a
path that is written two times, an entry behind a link, and every entry
that is not a file, a directory or a link.
- `check-layers --slim <oci archive> --full <oci archive>` checks the
table above on the built images. It reads the receipt to decide which
archive belongs in which layer. It fails when the full image does not
start with the slim image's layer blobs in the same order, when a path
that is not a directory is in two layers, and when a shared layer holds
transport content under any name or directory.
- The script reads the archive and its layers itself. It does not use
the system's `tar`, so every platform reads them the same way. It finds
a member only under the name that buildx gives it.
- `.github/workflows/runner-image.yml`: each leg builds each variant one
time, as an OCI archive and nothing else. It unpacks both archives, runs
`check` on each tree with its variant, runs `check-layers`, and runs the
smoke matrix on the slim tree. The tree that is checked is therefore the
bytes of the image, not a second export of the same build. Every step
that builds has a time limit. The workflow still has no registry access.
- Why one export: in the first runs of this pull request, the slim build
stalled on all four legs. Each build command had two exports, a tree and
an archive. The slim command, with every stage from the cache, wrote its
archive and then made no progress on the tree for 50 minutes. A test now
holds the rule of one export and a time limit for each build command.
- The smoke matrix runs on the slim tree. The daemon is in a layer that
both variants share, so one run covers both.
- `server/src/__tests__/runner-image-identity.test.ts`: the test that
holds the rules for the Runner stages now finds a stage wherever
BuildKit starts one. It fails for `FROM x as name`, a flag on `FROM`, a
lowercase or indented `COPY`, an `ADD` or `ONBUILD`, a `COPY` with
another flag, and a `COPY` that continues on the next line. Nine samples
show each case.
- Two comments are corrected. The comment on
`PAPERCLIP_RUNNER_INPUTS_DIGEST` in `build-provider-pack.mjs` said that
no check reads the field. The `Dockerfile` comment on the publication
argument named a workflow "that builds the image for publication".
- `doc/runner-image-contract.md` (159 lines): the two variants, the
section "Layers", how the checks get their tree, and the new checks.
`doc/DOCKER.md` names the slim target.

Script sizes: `runner-image-layout.mjs` 969 lines,
`runner-image-oci.mjs` 585, `runner-image-identity.mjs` 166,
`create-provider-pack-archive.mjs` 114.

## Verification

Image identity at this commit:
`a544fc9dde780963419ede0f34252f3a57de43a760d41d3eb8fcd4f577504f6a`.

Linux (the pinned `node:24.22.3-bookworm` base with GNU tar 1.34 and
zstd, the worktree mounted read-only):

- `runner-image-identity.test.ts` (41), `runner-image-layout.test.ts`
(100), `runner-image-oci.test.ts` (50), `runner-image-workflow.test.ts`
(8), `provider-pack-archive.test.ts` (47, none skipped),
`retained-provider-pack-source.test.ts` (19),
`remote-provider-pack-verification.test.ts`,
`docker-image-layer-reuse.test.ts`, `docker-build-stamp.test.ts`: 293
tests pass in 9 files.
- The same files pass on macOS. The tests of `check-layers` failed on
Linux in the first runs of this pull request: their fixtures named the
archive members `./index.json`, which bsdtar finds and GNU tar does not.
The fixtures now name the members as buildx does.

`linux/arm64`, on a local Docker host, with the new export path:

- Each variant builds as an OCI archive only: the full target in 156
seconds without a cache, the slim target in 5 seconds from the cache.
- `unpack` writes the full image (10,519 entries that are not
directories) in 4 seconds, and the slim image in 4 seconds.
- `check <tree> --variant <variant> --expect-inputs-digest <digest>
--expect-source-revision <sha> --expect-architecture arm64` passes on
each unpacked tree. `runner-image.json` is the same file in both.
- `check-layers --slim <slim> --full <full>` passes.
- The smoke matrix passes on all five base images, from the unpacked
slim tree.

| Layer | Digest | Bytes | In |
| --- | --- | --- | --- |
| 1 | `sha256:3f21b15b3a99…70ac1c` | 379,609,589 | slim and full |
| 2 | `sha256:d5567acc977f…b4f12a` | 43,906,956 | slim and full |
| 3 | `sha256:6a340088ca2c…6ba5b5` | 410,938,259 | full |
| 4 | `sha256:789e97f5db88…3eab44` | 15,656,249 | full |

- The slim image is 423,516,545 bytes in two layers. The full image is
850,111,053 bytes in four.

Stability, with three builds that share no cache for the build step:

| Build | Source revision | Runner build output | Layer 1 | Layer 2 |
Layer 3 | Layer 4 |
| --- | --- | --- | --- | --- | --- | --- |
| A | `aaaa…` | this commit: 6 files of 1 MiB or more under `dist` |
`3f21b15b…` | `d5567acc…` | `6a340088…` | `789e97f5…` |
| B | `bbbb…` | this commit | `3f21b15b…` | `a2f8a4fe…` | `6a340088…` |
`4e6c492d…` |
| D | `dddd…` | one new source file that adds two large files under
`dist` | `3f21b15b…` | `33b0bdaf…` | `6a340088…` | `0ea322bf…` |

- Layers 1 and 3 are byte-identical in all three: 790,547,848 of
850,111,053 bytes, 93%. Build D has two more large files under `dist`,
eight in place of six, and another image identity. Its dependency files
keep the archive numbers 0 to 20. With the earlier numbering, those
numbers moved by two, and layer 3 was a new blob with the same contents.
- Layer 1 has the same digest as before this round. Layer 3 has a new
digest one time, because the archives have new numbers.

Other checks:

- `tests/runner-e2e` workflow tests: 39 pass. `node --test
.github/scripts/tests/*.test.mjs`: 799 pass. `node --test` on the image
contract scripts: 33 pass. `check-docker-deps-stage.mjs`,
`check-node-version-policy.mjs` and `docker buildx build --check` report
nothing.

GitHub, at this head:

- The `Runner image` workflow passes on both architectures with the new
export path: `Build and check (amd64)` in 14m41s and `Build and check
(arm64)` in 8m41s. Each leg builds both variants, checks both layouts
and the layer rule, and runs the smoke matrix. The first runs of this
pull request stalled in the slim export before any check.

Never run:

- `native-session-executor.test.ts`. It does not load on this host, with
or without this change, because `@paperclipai/plugin-sdk` is not built
here. It imports the reader of the retained pack and no archive number.
- The full test suite and the full typecheck. CI must supply them.

## Risks

- The two changes to `create-provider-pack-archive.mjs` change the
application image's transport archives: about half of them lose nine
bytes, and all of them get new numbers one time. An archive's content
does not change. A reader pairs file N of a receipt with archive N of
the same build.
- The large dependency files in the pack, and in their transport
archives, now have the modification time 0 (1970). Before, they had the
build time. Nothing in this repository reads those times.
- `unpack` is a reader of tar and gzip that this repository owns. It
reads the layers that BuildKit, GNU tar and bsdtar write (tested with
each), and it fails for a header it does not know.
- The check on the built images, not the recipe, is what proves the
layer rule; it runs in each leg of the workflow.
- `check` now needs `--variant`. A caller that does not pass it fails
with a clear message. No caller exists outside this repository yet.

> For core feature work, check [`ROADMAP.md`](ROADMAP.md) first and
discuss it in `#dev` before opening the PR. Feature PRs that overlap
with planned core work may need to be redirected — check the roadmap
first. See `CONTRIBUTING.md`.

## Model Used

- Claude Fable 5.2 (`claude-fable-5-2`), Anthropic, used through Claude
Code with tool use (shell, file edits, local Docker builds).

## Checklist

- [x] I have included a thinking path that traces from project context
to this change
- [x] I have specified the model used (with version and capability
details)
- [x] I have checked ROADMAP.md and confirmed this PR does not duplicate
planned core work
- [x] I have searched GitHub for duplicate or related PRs and linked
them above
- [x] I have either (a) linked existing issues with `Fixes: #` / `Closes
#` / `Refs #` OR (b) described the issue in-PR following the relevant
issue template
- [x] I have not referenced internal/instance-local Paperclip issues or
links (only public GitHub `#NNN` / `github.com/paperclipai/paperclip`
URLs)
- [x] My branch name describes the change (e.g. `docs/...`, `fix/...`)
and contains no internal Paperclip ticket id or instance-derived details
- [x] I have run tests locally and they pass
- [x] I have added or updated tests where applicable
- [x] I have updated relevant documentation to reflect my changes
- [x] I have considered and documented any risks above
- [x] All Paperclip CI gates are green
- [x] Greptile is 5/5 with no open P2s, recommendations, or follow-ups
- [x] I will address all Greptile and reviewer comments before
requesting merge

🤖 Generated with [Claude Code](https://claude.com/claude-code)

---------

Co-authored-by: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 19:52:02 -08:00

8.0 KiB

Runner image contract

The Runner image is the Runner built alone, as a plain file tree with no entrypoint and no operating system. An image build copies paths out of it instead of compiling the Runner again. Nothing in this repository consumes it yet. Its name is ghcr.io/paperclipai/paperclip-runner, and one build makes two variants:

  • full, the runner-artifacts target of the Dockerfile: every path below;
  • slim, the runner-artifacts-slim target: the same without the two paths marked "full only", the provider pack's transport archives.

Nothing publishes it yet: .github/workflows/runner-image.yml builds and checks it.

Layout

Every path a consumer may copy (RUNNER_IMAGE_PATHS in scripts/runner-image-layout.mjs). Every file is readable by every user.

Path Content
/runner-image.json Identity and description of this image.
/paperclip-runnerd The daemon. A stripped release binary, mode 0755.
/provider-pack/ The remote provider pack, with provider-pack.json.
/provider-pack.archive.json Full only. Receipt of the pack's transport archives.
/provider-pack.archives/ Full only. The transport archives the receipt lists.
/runner-package/package.json The Runner package manifest.
/runner-package/dist/ The Runner's complete build output. dist/bin/paperclip-runnerd is the same file as /paperclip-runnerd.
/runner-package/node_modules/.cache/paperclip-runner-build-inputs.json The build stamp the Runner's build recorded for that output.
/runner-package/scripts/provision-grok.mjs Provisions the native Grok executable. Reads platforms.json by relative path.
/runner-package/src/providers/grok/platforms.json The Grok release pins.
/runner-package/src/live/runnerd-codex-transport.ts The transport source, as a contract file. It defines RUNNER_CLIENT_VERSION.
/bundles/runnerd-codex-transport.mjs The pack's dist/live/runnerd-codex-transport.js as one module. It imports without node_modules.
/pnpm-lock.yaml The lockfile the image was installed from.

Paths under /runner-package/ keep their place inside packages/paperclip-runner. runner-image.json describes one platform, and is the same file in both variants:

  • inputsDigest (the identity below) and buildInputsDigest (the digest in the Runner's build stamp);
  • sourceRevision: the commit given to the build, also in the pack as payload.runnerSourceRevision;
  • publication: true only for a build with the build argument PAPERCLIP_RUNNER_IMAGE_PUBLICATION=1. Only then does the pack carry the identity, as payload.runnerInputsDigest. Another image build that runs the stage inline builds the same Runner but is not this image;
  • platform (linux, amd64 or arm64) and libc: the glibc the daemon was compiled on (Debian bookworm, the oldest a consumer runs) and the newest glibc version it needs;
  • providerPack: the pack's digest and target;
  • paths and sha256: the table above, and the digest of every single file;
  • fullImageOnly: the names in paths that only the full image has.

Layers

  1. The pack's dependency files of 1 MiB or more: provider binaries and Node.
  2. Everything else, with runner-image.json.
  3. Full only: the transport archive of each file in layer 1.
  4. Full only: the other transport archives, the overlay archive, the receipt.

The slim image is layers 1 and 2. The full image is those same two layer blobs, then layers 3 and 4, which hold transport content and nothing else. Layers 1 and 3 have the same bytes in every build with the same dependency files, so a new image shares them with the one before it. A large file under the pack's dist is the Runner's own output: it and its archive are in layers 2 and 4. An archive is named by its file's place in the receipt, which lists the dependency files first, so their names do not depend on dist.

Identity

Both variants are named by one digest, inputs-<digest>: the variant is not part of the identity. scripts/runner-image-identity.mjs computes it from:

  • every file under the paths the build copies from the build context (RUNNER_IMAGE_CONTEXT_INPUTS, which include pnpm-lock.yaml): path, executable bit and content, and each symbolic link by its target;
  • the whole Dockerfile: the recipe, the base image pinned by digest and the toolchain pins. Any edit to it makes a new image;
  • the two platforms, linux/amd64 and linux/arm64.

The source revision is not part of it, and neither is the text of .dockerignore: a rule changes the digest only when it changes which of those files the build receives. The build computes the digest for itself:

docker buildx build --target runner-artifacts-identity --output type=local,dest=/tmp/identity .
jq -r .digest /tmp/identity/runner-image-identity.json

The install is frozen. It fails when the lockfile is behind the manifests the build reads (the root one, packages/paperclip-runner and packages/paperclip-eval-kernel). A contributor cannot edit the lockfile, so pull-request runs resolve it first. For a local build, run pnpm install --resolution-only --ignore-scripts --no-frozen-lockfile.

Checks

CI builds each variant as an OCI archive and nothing else. node scripts/runner-image-oci.mjs unpack <oci archive> --out <tree> writes the tree of an image from its layers, so the tree CI checks is the bytes of the image. It refuses a whiteout, an absolute or .. path, a path written twice and an entry behind a link.

node scripts/runner-image-layout.mjs check <tree> --variant slim|full runs in the build and again on each unpacked tree. The variant has no default: a slim tree with the transport paths fails, and so does a full tree without them. The check fails unless:

  • every documented path exists, matches its digest in runner-image.json, and resolves inside the tree;
  • the build stamp names the inputs the identity names;
  • every artifact in provider-pack.json has its digest, the dist tree and each provider asset tree match their tree digests, and the pack names this image's revision and platform;
  • the pack names the inputs digest in a publication build and in no other. --expect-inputs-digest fails on any other build;
  • in a full image, every transport archive matches its receipt, and the archives extract to the pack. The check extracts them as a sandbox does (GNU tar with the options in provider-pack-layers.ts) and compares paths, content, link targets and all twelve permission bits, after the a+rX grant the build makes once the archives are written.

node scripts/runner-image-oci.mjs check-layers --slim <oci archive> --full <oci archive> checks "Layers" on the two archives, and that no file is in two layers.

The build also runs paperclip-runnerd --build-metadata on every base image in docker/runner-image/Dockerfile.smoke. Add a base there before a consumer uses it.

Consuming the image

Read the image only with COPY --from, and pin it by digest:

FROM ghcr.io/paperclipai/paperclip-runner@sha256:<digest> AS runner-artifacts
FROM debian:trixie-slim
COPY --from=runner-artifacts /paperclip-runnerd /usr/local/bin/paperclip-runnerd

A Dockerfile with a runner-artifacts or runner-artifacts-slim stage of its own, as in this repository, can take a built image or tree in its place with --build-context <stage>=<image or directory>. The stage is then not built.

Known limits

  • A build without PAPERCLIP_RUNNER_SOURCE_REVISION or PAPERCLIP_BUILD_COMMIT has no pack. It is for local use.
  • The build runs the steps of the Runner's build script that write output, not its drift checks; repository CI runs those.
  • A build that vendors /runner-package/ reuses dist only when its own Runner build-inputs digest equals the stamp's. The image computes that digest in the .dockerignore-filtered context; a checkout gives another.
  • # syntax=docker/dockerfile:1.20 is a tag. A new frontend release under it does not change the identity.
  • The archive check does not tell a directory with its own archive member from one created only as a file's parent.