## Thinking Path > - Paperclip is the open source app people use to manage AI agents for work > - On Paperclip Cloud, the board UI sends browser analytics to PostHog through a same-origin proxy at `/_ph` > - The proxy limits requests in flight: 16 per client address and 256 in total > - Each open tab runs posthog-js, and one tab can have a few requests in flight at once > - On Railway without `TRUST_PROXY`, `req.ip` is the private edge hop, so all visitors share one 16-request limit > - This pull request raises the limits, makes them configurable, and stops the per-client limit when `req.ip` is a shared private hop > - The benefit is that busy stacks with many users and many tabs do not lose analytics to 429 answers, and ops can see when a limit is hit ## Linked Issues or Issue Description **Subsystem affected** Server: the PostHog reverse proxy for Cloud browser analytics (`server/src/routes/posthog-proxy.ts`). **Problem or motivation** The proxy limits are too low for busy Cloud stacks. One user with many tabs can use 16 requests in flight. Behind the Railway edge without `TRUST_PROXY`, `req.ip` is a private `100.64.x.x` hop, so all visitors share one 16-request limit. The proxy then answers 429 and posthog-js drops or delays events and replay uploads. Ops cannot change the limits and cannot see when the proxy refuses requests. **Proposed solution** Raise the defaults to 128 per public client address and 1024 in total. Read both limits from two environment variables with a strict parse and a ceiling. When `req.ip` is not a public address, apply only the total limit. Give each request a 60 second deadline. Log a warning at most once a minute when the proxy refuses requests at a limit. **Alternatives considered** Find the visitor for the per-client limit from `X-Forwarded-For`. A client can write that header, and an earlier security review asked the proxy to keep `req.ip` as the key, so this change does not do that. Scale the per-client limit for a shared hop. All visitors share the hop, so a scaled limit is only a second total limit. The proxy applies the total limit alone instead. **Additional context** Fleet operators can set the variables with an `env_config` campaign. `doc/cloud-browser-analytics.md` tells how. Refs #22012 (the proxy) and #22052 (visitor address behind a private hop). ## What Changed - Raised `DEFAULT_POSTHOG_PROXY_LIMITS` to 128 requests in flight per client address and 1024 in total. The 64 MiB body limit did not change. - Added `PAPERCLIP_POSTHOG_PROXY_MAX_IN_FLIGHT` and `PAPERCLIP_POSTHOG_PROXY_MAX_IN_FLIGHT_PER_CLIENT`. `resolvePostHogProxyLimits` reads them where `resolvePostHogProxyMount` builds the proxy. A value must be a whole number from 1 to 65536. An invalid value logs a warning and uses the default. The server does not stop. - Added `posthogProxyClientKey`. It returns `req.ip` only when it is a public address. For a private, carrier-grade NAT, loopback, link-local or other reserved address, or no address, the proxy applies only the total limit. The key never comes from a client header. - Added `createPostHogProxyLimitReporter`. When the proxy answers 429, it logs `PostHog proxy refused requests at its in-flight limit` at most once a minute. The fields are the refusal counts per limit since the last warning, the requests in flight, the limits and the time since the last warning. The warning has no addresses. It uses no timer: it checks the time when a refusal occurs. - Added a request deadline of 60 seconds from the time the proxy accepts a request. At the deadline, the proxy stops the request to PostHog and closes the browser response, also when PostHog already finished and the browser does not read the response. The slot is then free again. Before, the 30 second upstream timeout was an idle timeout, so a slow body that sent a byte at a time could hold a slot until the server request timeout (300 seconds). - The mount object now also returns the limits in use. - Updated `doc/cloud-browser-analytics.md`: the limits, why these defaults, the variables, the shared-hop behavior, the warning fields and how to tune a fleet with an `env_config` campaign. Why these defaults: - 128 per address covers about 10 people behind one office network, each with 4 tabs and 3 requests in flight per tab, with space left over. - 1024 in total keeps memory bounded. The proxy streams bodies, so a request holds two sockets and the stream buffers between them, not the full body. In a local test on this branch, 1024 held requests added about 96 MiB of resident memory with 4 KiB bodies and about 173 MiB with 256 KiB bodies (256 held requests with 4 KiB bodies: about 40 MiB). These numbers include the test client and the test upstream in the same process, so the proxy share is smaller. Operators can lower the limit for small stacks. ## Verification - `cd server && npx vitest run src/__tests__/cloud-posthog-browser.test.ts`: 87 tests pass (5 runs in a row). - New tests: - Defaults, values from the environment, an empty value, and invalid values (`0`, `-5`, `1.5`, `1e3`, `12abc`, `abc`, `0x10`, `+8`, `65537`, `1024000`, a value larger than a safe integer). `65536` is accepted. Each invalid value keeps the default and warns once per variable. - The mount passes the configured limits to the proxy. - Per-client limit for a public address (with `trust proxy` set): a second request from the same address gets 429, a request from another address gets 200. - Shared private hop (no trusted proxy, peer is loopback): the per-client limit does not apply, and the total limit still answers 429. - A forged `X-Forwarded-For` does not select the bucket when no proxy is trusted: three held requests with the same forged public address and a per-client limit of 1 all get 200. - Request deadline: an upstream that does not answer gives 502 at the deadline and frees the slot, a body that trickles in is cut off at the deadline, and a 16 MiB response that the browser does not read is closed at the deadline. - The tests wait until the held upstream receives each request, not for a fixed time. - Total limit across public addresses, and the reported reason (`total` or `per_client`) for each 429. - The warning rate limit: one warning for the first refusal, none in the next 60 seconds, then one warning with the counts of the refusals in between, and no addresses in any warning. - Red/green: with the shared-hop rule removed (`posthogProxyClientKey` returns `req.ip`), 9 of the new tests fail. With the deadline removed, the 2 deadline tests fail. With both, all pass. - `cd server && npx tsc --noEmit -p tsconfig.json`: passes. - `pnpm verify`: exit 2, because `doc/cloud-browser-analytics.md` is a global CI input. Required CI supplies the broad coverage. - Memory numbers come from a local script that held 1024 requests through the proxy against a local upstream (Node 26, macOS). ## Risks - Higher limits let more requests use memory and sockets at once. The worst case is bounded by the total limit, and operators can lower it with `PAPERCLIP_POSTHOG_PROXY_MAX_IN_FLIGHT`. - Behind a shared private hop, one client can use all of the total limit, and other visitors then get 429. The request deadline frees each slot after at most 60 seconds, but a client that sends again can keep the limit full. Before this change, the same visitors shared a limit of 16, which one client could also fill. A separate limit for the hop would not help the visitors behind it, because one client that fills it blocks all of them. Setting `TRUST_PROXY` brings back the per-client limit. - A PostHog request that takes longer than 60 seconds now fails with 502. posthog-js bodies are small and PostHog answers in well under a second, so this does not affect normal traffic. - If an operator sets `TRUST_PROXY` to trust every hop, `req.ip` comes from the client's `X-Forwarded-For`. This was already true before this change. The total limit still applies. - The proxy is mounted only on Cloud with browser analytics on. Self-hosted installs do not change. > For core feature work, check [`ROADMAP.md`](ROADMAP.md) first and discuss it in `#dev` before opening the PR. Feature PRs that overlap with planned core work may need to be redirected — check the roadmap first. See `CONTRIBUTING.md`. ## Model Used - Claude Opus 5.5 (claude-opus-5-5), Anthropic, used through Claude Code with tool use (shell, file edits, test runs). ## Checklist - [x] I have included a thinking path that traces from project context to this change - [x] I have specified the model used (with version and capability details) - [x] I have checked ROADMAP.md and confirmed this PR does not duplicate planned core work - [x] I have searched GitHub for duplicate or related PRs and linked them above - [x] I have either (a) linked existing issues with `Fixes: #` / `Closes #` / `Refs #` OR (b) described the issue in-PR following the relevant issue template - [x] I have not referenced internal/instance-local Paperclip issues or links (only public GitHub `#NNN` / `github.com/paperclipai/paperclip` URLs) - [x] My branch name describes the change (e.g. `docs/...`, `fix/...`) and contains no internal Paperclip ticket id or instance-derived details - [x] I have run tests locally and they pass - [x] I have added or updated tests where applicable - [x] I have updated relevant documentation to reflect my changes - [x] I have considered and documented any risks above - [ ] All Paperclip CI gates are green - [ ] Greptile is 5/5 with no open P2s, recommendations, or follow-ups - [x] I will address all Greptile and reviewer comments before requesting merge 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
20 KiB
Cloud Browser Product Analytics
On Paperclip Cloud, the board UI can send page views, sessions, autocapture
clicks, heatmaps, Web Vitals and session replays to PostHog. Self-hosted
installs never do this: they do not download posthog-js and do not serve the
PostHog proxy.
Who gets it
The server decides, in server/src/services/cloud-posthog-browser.ts. The
authenticated GET /api/auth/get-session response carries a
browserAnalytics object only when all of these hold:
- The instance is cloud managed (
isCloudManagedInstance). PAPERCLIP_POSTHOG_PROJECT_TOKENandPAPERCLIP_CLOUD_STACK_IDare set.PAPERCLIP_POSTHOG_BROWSER_ENABLED=1.
Otherwise the field is null, and the browser loads nothing. When it is set,
the browser loads PostHog's browser script (/_ph/static/array.js, through the
proxy) only after the page settles (first paint, page reads finished, browser
idle), so cold loads do not wait for it. posthog-js is not an npm dependency
of the board and is in no bundle chunk; PostHog serves it, as it serves the
extensions posthog-js loads at run time (recorder, web vitals).
Configuration
| Variable | Default | Meaning |
|---|---|---|
PAPERCLIP_POSTHOG_PROJECT_TOKEN |
— | PostHog project token. It is public by design: it can send events but cannot read data. |
PAPERCLIP_POSTHOG_HOST |
https://us.i.posthog.com |
PostHog ingest host. The proxy forwards to it. |
PAPERCLIP_POSTHOG_ENVIRONMENT |
— | staging or production. Added to every event as environment. |
PAPERCLIP_POSTHOG_BROWSER_ENABLED |
off | 1 turns browser analytics on for this stack. Leave it unset to keep it off. |
PAPERCLIP_POSTHOG_REPLAY_ENABLED |
on (when browser analytics is on) | 0 turns session replay off for this stack and keeps the other browser analytics. |
PAPERCLIP_POSTHOG_PROXY_MAX_IN_FLIGHT |
1024 |
Proxy requests in flight for the whole server. See Proxy limits. |
PAPERCLIP_POSTHOG_PROXY_MAX_IN_FLIGHT_PER_CLIENT |
128 |
Proxy requests in flight from one public client address. See Proxy limits. |
PAPERCLIP_POSTHOG_COUNTRY_HEADER |
— | Name of a request header that the platform edge sets to the visitor's two-letter country code (for example CF-IPCountry behind a proxied Cloudflare zone). Leave it unset unless the edge sets the header and drops a value from the client. See Consent. |
Per-stack opt-out
For a customer whose contract forbids recording, set
PAPERCLIP_POSTHOG_REPLAY_ENABLED=0 on that stack. To turn off all browser
analytics for a stack, unset PAPERCLIP_POSTHOG_BROWSER_ENABLED. Both take
effect on the next server restart.
Consent
Visitors in the EU, the EEA, the UK and Switzerland must agree before browser analytics and session replay start. Everyone else keeps analytics on by default. Both can change the choice later. Server events are not affected: they set no cookies.
Who must agree
- The server decides when it knows the visitor's country. If
PAPERCLIP_POSTHOG_COUNTRY_HEADERnames a header and the request carries a valid two-letter code in it,browserAnalytics.consentRequiredistruefor the EU and EEA countries (and their outermost regions and Svalbard), the UK (and the Crown Dependencies and Gibraltar) and Switzerland, andfalsefor every other ISO 3166-1 alpha-2 country. The aliasesUKandELcount asGBandGR, andEUandEZcount as consent required. Any other value (for exampleXX,UN,XKorT1) givesnull. - Otherwise
consentRequiredisnull, and the browser decides from its time zone. It asks when the zone starts withEurope/, is an EU, EEA or UK zone outside Europe (for exampleAtlantic/Canary,Atlantic/Reykjavik,Asia/Nicosia,Indian/Reunion), or is unknown (UTC,Etc/*, empty, orIntlfails). When unsure, it asks.
Both lists live in one place, packages/shared/src/analytics-consent.ts
(countryRequiresAnalyticsConsent, timeZoneRequiresAnalyticsConsent). The
browser's choice logic is in ui/src/lib/analytics/consent.ts.
Paperclip Cloud uses the time zone today. Requests reach Railway through
DNS-only Cloudflare records, so no Cloudflare country header arrives, and the
Railway edge adds no country header. Set PAPERCLIP_POSTHOG_COUNTRY_HEADER
only when an edge that sets and overwrites a country header is in front of
the stack. A visitor who forges the header can only change the default for
their own browser.
What happens
| Visitor | Before a choice | Accept / switch on | Decline / switch off |
|---|---|---|---|
| Must agree, no Do Not Track or Global Privacy Control | Banner. posthog-js does not load: no /_ph requests, no PostHog cookies or storage. |
posthog-js loads at once, without a reload. | Nothing loads. |
Must agree, navigator.doNotTrack === "1" or navigator.globalPrivacyControl === true |
No banner. Counts as Decline, also over a stored Accept. | Not possible: the settings switch is off and disabled, and says why. | Nothing loads. A running client opts out. |
| Everyone else | Loads after the page settles, as before. | — | opt_out_capturing() and stopSessionRecording() run at once. After the next load, posthog-js does not load. |
The gate calls one function, syncProductAnalytics(config, consent) in
ui/src/lib/analytics/product-analytics.ts. It starts, opts in, opts out or
cancels. Analytics stops whenever the choice is not granted, also when it goes back
to "ask" (another tab removes the stored choice, or a session refresh changes
consentRequired to true). If the choice changes while posthog-js is still
downloading, init() does not run until the choice is granted again.
The banner sits at the bottom of the page and does not block the board. It says that recordings hide what the visitor types and their messages, documents and connected accounts, but can show page names such as task titles. It links to the privacy policy (https://paperclip.ing/privacy/).
Where the choice is kept
The choice is per browser, in localStorage under
paperclip.analyticsConsent (granted or denied). The latest choice on
the page wins, also when storage rejects the write; it then lasts for the open
page only. Each user can change it in
Settings → Profile → Product analytics. The switch shows only when browser
analytics is on for the instance. Turning it on after an earlier opt-out also
clears the PostHog opt-out (opt_in_capturing()).
To reset the choice and see the banner again, remove the key in the browser
console: localStorage.removeItem("paperclip.analyticsConsent"), then reload.
Reverse proxy
The browser sends to /_ph on its own origin, so ad blockers do not drop
events. server/src/routes/posthog-proxy.ts is not a generic proxy. It
forwards only the requests posthog-js makes:
| Method | Path | Upstream |
|---|---|---|
POST |
/e/, /i/v0/e/, /batch/ |
ingest host |
POST |
/s/ (session replay) |
ingest host |
POST |
/flags/, /decide/ |
ingest host |
GET |
/array/<token>/config, /array/<token>/config.js |
assets host |
GET |
/static/<name>.js |
assets host |
The ingest host is PAPERCLIP_POSTHOG_HOST. The assets host is derived from it
(us.i.posthog.com → us-assets.i.posthog.com). Every other method or path
answers 404 without contacting PostHog. The proxy streams bodies, builds a new
header set from an allowlist plus X-Forwarded-For, and never forwards the
inbound Host, Cookie or Authorization headers. It drops Set-Cookie from
responses. It refuses bodies over 64 MiB (413) and limits the requests in
flight (429, see Proxy limits). It is mounted only when
browser analytics is on. It does not require a session: posthog-js sends some
events while a page unloads, and the proxy can only reach the two PostHog hosts
with the public project token, like PostHog's own ingest endpoint.
Proxy limits
Each open tab runs posthog-js. One tab sends event batches, session replay
uploads and remote settings requests, so it can have a few requests in flight
at once, and more when PostHog is slow (the proxy waits up to 30 seconds for
an answer). The proxy has two limits. When a request is over a limit, the proxy
answers 429 with Retry-After: 1, and posthog-js sends it again later.
| Limit | Default | Variable |
|---|---|---|
| Requests in flight for the whole server | 1024 | PAPERCLIP_POSTHOG_PROXY_MAX_IN_FLIGHT |
| Requests in flight from one public client address | 128 | PAPERCLIP_POSTHOG_PROXY_MAX_IN_FLIGHT_PER_CLIENT |
Why these values:
- 128 per address covers about 10 people behind one office network, each with 4 tabs and 3 requests in flight per tab, with space left over.
- 1024 in total keeps memory use bounded. The proxy streams bodies, so a request holds two sockets and the stream buffers between them, not the full body. In a local test, 1024 held requests added about 96 MiB of resident memory with 4 KiB bodies and about 173 MiB with 256 KiB bodies. These numbers include the test client and the test upstream, which ran in the same process. Most PostHog bodies are a few KiB.
A value must be a whole number from 1 to 65536 (for example 2048). The
server reads the values at start. If a value is not valid, the server logs a
warning, uses the default, and starts as usual.
Each request has a deadline of 60 seconds from the time the proxy accepts it, whether or not data still moves. At the deadline, the proxy stops the request to PostHog and closes the browser request, so a slow body or a slow answer cannot hold a slot for longer. This deadline is not configurable. The proxy also stops a request to PostHog that has no data for 30 seconds.
Shared platform hop
The per-client limit uses req.ip, which comes from the server's trusted proxy
settings (TRUST_PROXY). It never comes from a header the client controls. If
TRUST_PROXY is unset behind a platform proxy, req.ip is the proxy's private
hop (for example 100.64.x.x on Railway). All visitors come from that one
address, so a per-client limit would hold back all of them together.
When req.ip is not a public address (private, carrier-grade NAT, loopback,
link-local or another reserved range, or no address), the proxy applies only
the total limit. A separate limit for the shared hop would not protect the
visitors behind it: one client that fills it blocks all of them, the same as
with the total limit. The total limit and the request deadline bound the
memory and sockets that clients can use. It does not read X-Forwarded-For to find the visitor for a
limit, because a client can write that header. Set TRUST_PROXY to the
platform's proxy range so that req.ip is the visitor, and the per-client
limit applies again.
When the limits are hit
When the proxy refuses a request at a limit, it logs the warning
PostHog proxy refused requests at its in-flight limit at most once a minute.
The warning has these fields, and no addresses or other visitor data:
refusedAtTotalLimitandrefusedAtPerClientLimit: the requests refused at each limit since the last warning (the first warning counts only one).inFlight: the requests in flight when the warning was written.maxInFlightandmaxInFlightPerClient: the limits in use.sinceMs: the time since the last warning, ornullfor the first one.
Tuning a fleet
Set the variables with a fleet env_config campaign, the same way as the
other PAPERCLIP_POSTHOG_* variables. Start with a canary stack. The server
reads the values at start, so a campaign that drains and restarts the stacks
applies them at once, and a campaign with "applyOnNextDeploy": true applies
them on the next deploy. To go back to the defaults, remove the variables.
Raise PAPERCLIP_POSTHOG_PROXY_MAX_IN_FLIGHT when the warning shows refusals
at the total limit and the stack has memory to spare. Raise
PAPERCLIP_POSTHOG_PROXY_MAX_IN_FLIGHT_PER_CLIENT when it shows refusals at
the per-client limit, for example for a customer with many people behind one
address.
Visitor location
The X-Forwarded-For value that the proxy sends to PostHog carries the
visitor's location. When the socket peer is private, the proxy uses the
rightmost public X-Forwarded-For entry, which the platform edge appended.
This value is used only for location, never for limits.
Identity
- After sign-in:
identify(session.userId, { email, name }).session.userIdis the authenticated actor's user id verbatim (req.actor.userId, for examplepaperclip-id:...), the same id server events use asdistinct_id. Email and name are person properties only, never event properties. group("workspace", stackId).- Every event carries
deployment_source: "cloud"andenvironment. WithoutPAPERCLIP_POSTHOG_ENVIRONMENT,environmentisstagingon a*.staging.paperclip.apphost andproductionotherwise. - Sign-out:
reset(), called byuseSignOutbefore it leaves the page. - API requests to our own host carry PostHog tracing headers, so server events link to the browser session.
Privacy
Session replay shows text by default, the way PostHog normally works. Text is masked only inside marked customer content. Input values and attribute values are always masked.
-
Session replay masks every input value (
maskAllInputs). -
Replay masks text only inside these markers (
ANALYTICS_MASK_TEXT_SELECTORinui/src/lib/analytics/privacy.ts, passed as rrwebmaskTextSelector):ANALYTICS_MASK_CLASS(ph-mask ph-sensitive): customer content.ANALYTICS_NO_CAPTURE_CLASS(ph-no-capture): secrets. Replay blocks these elements entirely.contenteditableeditors (notcontenteditable="false").
rrweb masks a text node only when its parent matches the selector or has an ancestor that matches it. All other text, for example navigation, headings, buttons, task titles, agent names, project names and company names, is recorded as it is.
-
Replay also masks attribute values (
maskReplayAttribute): only layout attributes (class,style,role,data-state, SVG geometry and similar), rrweb metadata and stylesheet links keep their values.title,aria-label,alt,placeholder,src,href,data-*values and element references (id,for,aria-labelledby) are always masked, so images record as empty boxes and link targets (for example download links with file paths) never leave. -
The masking options in
posthog.inittake precedence over the PostHog project's "Privacy and masking" settings (posthog-js 1.450). posthog-js ignores the project setting and logs a warning when the two differ. Keep the project masking settings empty, and change masking only inprivacy.ts. Theph-maskclass is also the posthog-js defaultmaskTextClass. -
ANALYTICS_NO_CAPTURE_CLASSreplaces secrets with a blank box in replays: every password-typeInput, environment variable values, new secret values, and secrets shown as text: one-time sign-in and device codes, pairing and setup prompts, identity confirmation links, newly issued API keys and gateway tokens, gateway client snippets, webhook URLs and secrets, invite claim secrets, raw provider frames and SSH fallback commands. -
Every event and replay meta event goes through
scrubCapturedEvent(before_send). Every URL keeps only its origin and path: query and hash values never leave, because they can hold credentials, file paths or search text. The token segment of/board-claim/<token>and/invite/<token>is redacted (redactAnalyticsUrl). Other strings only have secretkey=valuepairs redacted. -
Events never carry the page title (
before_senddropstitle), because Paperclip page titles name the task and the organization. -
Autocapture never records element text or attribute values (
mask_all_text,mask_all_element_attributes). It keeps the click, the element tree and the page. -
Connected-account content is Google user data or Slack data. No human may read it in a replay (privacy policy and Google API Limited Use). The surfaces below, and other free-form text that agents or customers write, carry
ANALYTICS_MASK_CLASSon their content element (not on the chrome around it):- Rendered markdown (task bodies, comments, chat messages, documents), the rich editor, task and issue chat threads (messages, tool calls, tool results, interaction cards), the comment timeline and the file viewer.
- Link preview cards, task quicklook descriptions, external object pills and rows, and related-work titles.
- Email message cards and email send intents.
- Connection names, connected account names, aliases and email addresses (Browse rows and the remove dialog, Connections, app detail headers, the app sidebar, connection choice lists and instructions, aggregator and Composio account dialogs, Tailscale networks, agent tool and audit tables, AI connection names, pickers, selects, account details and controls, pool run details, subscription and quota panels, adapter sign-in status, connection access and repair cards), GitHub logins (identity rows, bot people, chat setup, run identity history) and repositories, Slack workspace names (list and selected value), Slack account pickers, chat channels, linked user labels, the external task banner and chat identity pages.
- Connection and account management surfaces are masked by section, not
label by label: the Browse connector list, the App detail body below its
header, the Connections table, Tailscale networks, the chat connection
detail body and its account subtitle, GitHub chat setup, the AI
connection pool editor and the chat identity confirmation. Every dialog,
alert dialog, select (trigger and list), popover, dropdown, sheet and
tooltip under
pages/apps,features/connectionsandcomponents/ai-connectionscarries its own mask, because portals escape the page's masked container;replay-masking.test.tsxfails when one does not. - App action test results (parsed preview and raw response).
- Inbox and decision rows (subject and detail line), obligation evidence, Needs You notes and receipts, decision cards and compact decisions, decision records, and interaction cards (questions, options, answers, tool action requests, suggested tasks) wherever they render.
- Approval payloads, action card input and reason, recovery card headline, evidence and options, run ledger retry details and interrupt handoff previews.
- Run transcripts, run failure details, run events, run stdout and stderr excerpts (agent page and execution workspace operations), the run invocation command, notes, prompt, context and environment, Runner inspector frames, and every preformatted block that shows run output, tool or webhook payloads, request or response bodies, instructions, skills or package files.
- Saved connection instructions for agents.
- Document and case revision diffs.
- Search result snippets, toasts (title and body), voice and call transcripts, case summaries, files and fields, attachment previews and artifact previews (text, tables, patches and documents).
Component tests render these surfaces with distinctive fixture text and assert, through
ui/src/lib/analytics/replay-recording.test-utils.ts, that the text is rendered but not recorded (or is blocked, for secrets), including alternate branches, dialog portals and selected values in closed pickers.ui/src/lib/analytics/replay-masking.test.tsxalso pins the remaining surfaces at source level. A new surface that shows connected-account content needs the class and a test. -
Residual risk: text that the owner accepted as visible can still hold customer words. Task titles, agent names, project names, company names, routine names, artifact and document titles, and activity rows (which name the task or entity) are recorded as they are. Paperclip member names and email addresses on member, access and profile pages are recorded too. An agent can copy email or Slack text into a task title. Masking is opt-in per surface, so a new surface that renders connected-account content without the class is recorded until somebody marks it.
-
The UI never captures an event that the server already sends (
PAPERCLIP_EVENTS);product-analytics-events.test.tsenforces this.